Size Charts & Specifications

All dimensions are in millimeters (mm) unless otherwise noted. Capacities shown are nominal fill levels.

Size (oz / ml)	Height (mm)	Top Ø (mm)	Bottom Ø (mm)	Wall Type	Best For
8 oz / 240 ml	82	78	46	Single Wall	Espresso, Kids Coffee
12 oz / 350 ml	95	84	52	Single Wall	Small Hot Drinks
16 oz / 470 ml	110	92	56	Double Wall	Medium Hot Drinks
20 oz / 590 ml	124	98	62	Double Wall	Large Hot Drinks
24 oz / 710 ml	138	106	68	Double Wall	Boba, Large Lattes

Printing Note: Safe print area starts 4mm below the rim and wraps up to 70% of the cup height for optimal heat transfer visibility.

Size (oz / ml)	Height (mm)	Top Ø (mm)	Bottom Ø (mm)	Material	Best For
12 oz / 350 ml	102	86	58	Clear PET	Iced Coffee, Tea
16 oz / 470 ml	118	94	64	Clear PET	Smoothies, Cold Brew
20 oz / 590 ml	132	102	70	Clear PET	Bubble Tea, Shakes
24 oz / 710 ml	146	110	76	Clear PET	Family Portions, Catering

Condensation Note: PET cups are designed for 32°F–120°F (0°C–49°C). For extreme cold or extended hold times, double-wall insulation is recommended.

Size (oz / ml)	Height (mm)	Top Ø (mm)	Bottom Ø (mm)	Material	Lid Compatibility
16 oz / 470 ml	68	132	90	Bagasse / PLA	Flat, Vented
32 oz / 950 ml	82	164	112	Bagasse / PLA	Flat, Vented
40 oz / 1.2 L	94	186	128	Bagasse / PLA	Flat, Vented

Hot Liquid Warning: All bowls are lined for hot liquids up to 195°F (90°C). Vented lids recommended for soups & noodles to prevent pressure buildup.

Component	Compatible Cup Size	Material	Key Features
Dome Lid	12oz – 24oz Cold Cups	PP / PET	Sip hole, straw grommet option, spill-resistant
Flat Lid	8oz – 24oz Paper Cups	PP	Heat resistant up to 212°F, snap-lock fit
Vented Lid	16oz – 40oz Bowls	PLA / PP	Steam release vent, secure rim seal
Cradle Sleeve	12oz – 20oz Paper Cups	Recycled Kraft	Double-wall grip, custom logo ready
Flat Sleeve	8oz – 16oz Paper Cups	Recycled Kraft	Easy application, standard print area

Compatibility: All lids and sleeves are engineered to fit the nominal cup sizes listed. Manufacturing tolerances may vary by ±1.5mm.

Technical Guidelines

Ordering & Production Notes

Keep these specifications in mind when placing bulk orders or requesting custom prints.

📏 Manufacturing Tolerances

All paper and plastic products have a standard tolerance of ±2% on volume and ±1.5mm on height/diameter. Bowls and lids may vary slightly due to material shrinkage during molding.

🎨 Print Safe Zones

For custom branding, keep critical logos and text within the central 60% wrap area. Avoid placing designs near the rim or base where sealing and folding occur.

🌡️ Temperature Ratings

Paper cups: safe up to 212°F (100°C). PET cold cups: 32°F–120°F (0°C–49°C). Bowls: hot-fill safe up to 195°F (90°C). Always match lid material to expected beverage temperature.

📦 Bulk Packaging

Cups ship flat-packed in master cases of 500–1,000 units. Bowls ship nested at 200–500 per case. Lids and sleeves are poly-bagged and palletized for forklift delivery.